Measuring Guidelines
Opening Width
Measure the opening width near the top and near the bottom of the opening, take the smallest measurement as the opening width. For an end panel arrangement the width depends on how wide you want your storage solution or room divider to be. Please measure to where the inside of the end panel would be, as you would for an existing wall.
End panels are 2620mm long x 610mm wide x 18mm thick.
Opening Height
Measure the opening height near left and near the right hand side of the opening, take the smallest measurement as the opening height. For wider openings it's usually a good idea to measure the height every 1.5m in case there is any cure or bowing in your opening.
Strike Plates
A strike plate is used to allow a good surface for your doors to butt up to. It can also even out any irregularities in the wall surface of your opening. If you want to use a strike plate at one or both wall ends then we will subtract 18mm from the opening width you give us for each strike plate you require.
Each strike plate is 2620mm long x 100mm wide x 18mm thick.
Base Plates
If you want to use a base plate to ensure a good surface for the bottom track (if you are going onto carpet for example) then we will subtract 18mm from the opening height you give us.
Each base plate is 2620mm long x 100mm wide x 18mm thick.
For our installations we always like to 'measure twice and cut once'. If you have any concerns about your measurements or want any additional comments or advice, please get in touch: Call us on 0800 033 6014 or e-mail enquiries@wardrobesplusuk.com
We want you to have a great product that you will enjoy for a long time. We will at all times try to be informative, responsive and courteous regarding your enquiry or order for sliding wardrobe doors. We actually like talking to our customers and are genuinely pleased when you like your doors or other items.Best regards,
The Wardrobes Plus UK! team
